 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7220A CPH3122 / CPH3222 CPH3122 / CPH3222 Applications * PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features * * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3122 Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--30)40 (--)30 (--)5 (--)3 (--)5 (--)600 0.9 150 --55 to +150 Unit V V V A A mA W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)30V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)500mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz 200 (400)420 (25)20 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit A A Marking : CPH3122 : AT, CPH3222 : CT Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000300 / 41002 TS IM TA-100028,100030 No.7220-1/5 CPH3122 / CPH3222 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1.5A, IB=(--)30mA IC=(--)1.5A, IB=(--)75mA IC=(--)1.5A, IB=(--)30mA IC=(--)10A, IE=0 IC=(--)1mA, RBE= IE=(-)10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (-30)40 (-)30 (--)5 (50)30 (270)300 (27)25 Ratings min typ (--)120 (--)0.83 max (-)180 (--)1.2 (-180)130 (--270)195 Unit mV mV V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 0.6 Switching Time Test Circuit 0.2 0.15 PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 RB 0.05 1.6 2.8 RL =24 + 470F VCC=12V 0.6 1 1.9 2 + 100F 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 0.2 VBE= --5V IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. 40mA 0m 20m CPH3122 A --40mA A A --2.0 --1.8 IC -- VCE 0 --2 --3 2.0 IC -- VCE 10m A mA --10mA Collector Current, IC -- A 1.8 1.6 1.4 1.2 1.0 0.8 8mA 6mA 50mA Collector Current, IC -- A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --50m --6mA 30 --1.6 --8mA m A 4mA --4mA --2mA 2mA 0.6 0.4 0.2 IB=0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 0 CPH3222 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 IB=0 0.9 1.0 IT04604 Collector-to-Emitter Voltage, VCE -- V --3.0 IT04603 3.0 IC -- VBE Collector-to-Emitter Voltage, VCE -- V IC -- VBE CPH3122 VCE= --2V --2.5 2.5 CPH3222 VCE=2V Collector Current, IC -- A Collector Current, IC -- A --2.0 2.0 --1.5 1.5 --1.0 1.0 C 25C --25C --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04605 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT04606 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V Ta=7 5C 25C --25C Ta=7 5 No.7220-2/5 CPH3122 / CPH3222 1000 7 5 hFE -- IC CPH3122 VCE= --2V DC Current Gain, hFE Ta=75C 25C --25C 1000 7 5 hFE -- IC CPH3222 VCE=2V DC Current Gain, hFE 3 2 3 Ta=75C 25C --25C 2 100 7 5 100 7 0.01 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 1000 5 7 --10 IT04607 2 3 5 7 0.1 2 3 5 7 1.0 2 3 f T -- IC Collector Current, IC -- A 1000 5 7 10 IT04608 f T -- IC Gain-Bandwidth Product, f T -- MHz 5 Gain-Bandwidth Product, f T -- MHz 7 CPH3122 VCE= --10V 7 5 CPH3222 VCE=10V 3 2 3 2 100 7 5 --0.01 100 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 100 5 7 --10 IT04609 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Cob -- VCB Collector Current, IC -- A 7 5 7 10 IT04610 Cob -- VCB CPH3122 f=1MHz Output Capacitance, Cob -- pF CPH3222 f=1MHz Output Capacitance, Cob -- pF 7 5 5 3 3 2 2 10 --1.0 2 3 5 7 --10 2 3 5 IT04611 10 1.0 2 3 5 7 10 2 3 5 IT04612 Collector-to-Base Voltage, VCB -- V 7 5 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3122 IC / IB=20 3 2 CPH3222 IC / IB=20 3 2 100 7 5 3 2 --100 7 5 3 2 =7 Ta C C 5 25 -2 - C 5 C 5 =7 C Ta 5 --2 25 C 10 7 5 0.01 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A IT04613 Collector Current, IC -- A IT04614 No.7220-3/5 CPH3122 / CPH3222 3 2 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3122 IC / IB=50 7 5 3 2 VCE(sat) -- IC CPH3222 IC / IB=50 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 Ta= --25 C 75 25 C = Ta 75 C --2 C 5 C 25 C 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A 3 IT04615 3 VBE(sat) -- IC Collector Current, IC -- A IT04616 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3122 IC / IB=50 CPH3222 IC / IB=50 2 --1.0 1.0 Ta= --25C 7 Ta= --25C 7 5 25C 75C 75C 25C 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 IT04617 1.0 ASO 10 Collector Current, IC -- A IT04618 PC -- Ta Collector Dissipation, PC -- W ICP=5A IC=3A 10 0m <50s 0.9 CPH3122 / CPH3222 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 3 5 0 20 40 60 80 100 120 140 160 ms 50 Collector Current, ID -- A 1m M s 100 s 0 s ou nt s ed on DC ac op er era am tio ic n bo ar d (6 00 m 0.01 0.1 CPH3122 / CPH3222 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 m2 ! 0. 8m m ) Collector-to-Emitter Voltage, VCE -- V IT04619 Ambient Temperature, Ta -- C IT04620 No.7220-4/5 CPH3122 / CPH3222 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7220-5/5 |
Price & Availability of CPH3122
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |